✨Owgels Máy tập trung oxy Máy tập trung oxy Owgels Bình oxy 7l Bộ y tế hoàn chỉnh Máy tập trung oxy Máy oxy oxy di động trong có thể Máy tập trung oxy 24/7 Máy oxy di động cho bình oxy tại nhà Máy tạo oxy di động

Owgels Máy tập trung oxy Máy tập trung oxy Owgels Bình oxy 7l Bộ y tế hoàn chỉnh Máy tập trung oxy Máy oxy oxy di động trong có thể Máy tập trung oxy 24/7 Máy oxy di động cho bình oxy tại nhà Máy tạo oxy di độngOxygen concentrator DetailsFeatures-oxygen flow rate 0-5 liters/min-oxygen concentration is not less than 95.5-87%-maximum output pressure 40-70 kpa-pressure reducing mechanism 250 kpa ± 25 kpa-altitude 1,828 m above sea level without reducing concentration. At an altitude of 1,828-4000 meters, the efficiency is less than 90%. -Power 400w-use ac220v ± 10%, 50 ± 2% hz-not more than 52 decibels-dimensions 390 x 245 x 500 mm. -Weight 15.5 kg. -There is a sleep timer. For ease of use-lcd screen displays working hours, set shutdown time-there is a safety system, if the system is wrong or overheated, the machine will shut down-there is a power outage and abnormal pressure warning-there is a notification. Remind of low oxygen, high or low pressure, system error, no electricity-the compressor has thermal protection-there is a remote control. Control the switch and set the timer-the device can be connected to the nebulizer kit (models only), and the nebulization rate is not less than 15 ml/min. Warning and maintenance of oxygen machine1. The machine should be placed in an open place or where the wind can easily pass. It should be placed at least 1 foot away from the wall. The device should not be placed near the wall. Do not place the machine on foam, mattresses, carpets, and avoid placing the machine in poorly ventilated areas.2. Every time the machine is turned on, there must be at least 5 minutes for the machine to set up.3. Before each use of the inhaler function, the oxygen flow rate must be adjusted to 0 liters per minute.4. The machine will not work.5. When there is a power failure or a power failure. The machine will not work. When the current is lower than the power supply current by more than 10%6. When not in use, unplug the power plug every time. In the case of moving the machine, the machine can only be placed vertically. And take out the water tank to humidify every time you leave the machine7. If there is a problem with the equipment or cannot be used, please contact the company distributor8. Always use a damp cloth to clean the outside of the machine. Wipe thoroughly and use disinfectant.9. Wipe again regularly. The filter on the side of the machine should be cleaned once a week.10. Wash with water and air dry. The filter in the equipment should be replaced at least every 6 months.

Owgels Máy tập trung oxy Máy tập trung oxy Owgels Bình oxy 7l Bộ y tế hoàn chỉnh Máy tập trung oxy Máy oxy oxy di động trong có thể Máy tập trung oxy 24/7 Máy oxy di động cho bình oxy tại nhà Máy tạo oxy di độngOxygen concentrator DetailsFeatures-oxygen flow rate 0-5 liters/min-oxygen concentration is not less than 95.5-87%-maximum output pressure 40-70 kpa-pressure reducing mechanism 250 kpa ± 25 kpa-altitude 1,828 m above sea level without reducing concentration. At an altitude of 1,828-4000 meters, the efficiency is less than 90%. -Power 400w-use ac220v ± 10%, 50 ± 2% hz-not more than 52 decibels-dimensions 390 x 245 x 500 mm. -Weight 15.5 kg. -There is a sleep timer. For ease of use-lcd screen displays working hours, set shutdown time-there is a safety system, if the system is wrong or overheated, the machine will shut down-there is a power outage and abnormal pressure warning-there is a notification. Remind of low oxygen, high or low pressure, system error, no electricity-the compressor has thermal protection-there is a remote control. Control the switch and set the timer-the device can be connected to the nebulizer kit (models only), and the nebulization rate is not less than 15 ml/min. Warning and maintenance of oxygen machine1. The machine should be placed in an open place or where the wind can easily pass. It should be placed at least 1 foot away from the wall. The device should not be placed near the wall. Do not place the machine on foam, mattresses, carpets, and avoid placing the machine in poorly ventilated areas.2. Every time the machine is turned on, there must be at least 5 minutes for the machine to set up.3. Before each use of the inhaler function, the oxygen flow rate must be adjusted to 0 liters per minute.4. The machine will not work.5. When there is a power failure or a power failure. The machine will not work. When the current is lower than the power supply current by more than 10%6. When not in use, unplug the power plug every time. In the case of moving the machine, the machine can only be placed vertically. And take out the water tank to humidify every time you leave the machine7. If there is a problem with the equipment or cannot be used, please contact the company distributor8. Always use a damp cloth to clean the outside of the machine. Wipe thoroughly and use disinfectant.9. Wipe again regularly. The filter on the side of the machine should be cleaned once a week.10. Wash with water and air dry. The filter in the equipment should be replaced at least every 6 months.

👁️ 0 | 🔗 | 💖 | ✨ | 🌍 | ⌚
Owgels Máy tập trung oxy Máy tập trung oxy Owgels Bình oxy 7l Bộ y tế hoàn chỉnh Máy tập trung oxy Máy oxy oxy di động trong có thể Máy tập trung oxy 24/7