✨Dây cáp lõi đơn HELUKABEL H05V-K | Hộp 100m

Technical Data

• PVC single cores to DIN VDE 0285-525-2-31 / DIN EN 50525-2-31 and IEC 60227-3
• Temperature range: flexing -5°C to +70°C/ fixed installation -30°C to +80°C
• Nominal voltage U0/U 300/500 V
• Test voltage 2000 V
• Insulation resistance min. 10 MOhm x km
• Minimum bending radius fixed insatallation 4x core 
• Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad)   Details Cable Structure
• Bare Cu-conductor, to DIN VDE 0295 cl.5, fine-wire, BS 6360 cl.5, IEC 60228 cl.5.
• Core insulation of PVC compound type TI1 to DIN VDE 0207-363-3 / DIN EN 50363-3 and IEC 60227-3.   Properties
• The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers.   Test
• PVC self-extinguishing and flame retardant acc. to DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1 (equivalent DIN VDE 0472 part 804 test method B).   Note
• The following colours are recommended: black, white, blue, grey, brown, red, orange, turquoise, violet and pink. Exceptions are the colours green and yellow; these are only permitted if the safety regulations allows. Green is permitted for the identification of luminous decorative chains. All 2-coloured combinations of the abovesingle colours are allowed.   Application
• These single cores are determined for the installation to the inside of apparatus as well as for the protective laying to the lightings, in dry rooms, in production facilities, switch and distributor boards, in tubes, under and surface mounting of plasters.